Brookfield, MN · licensed electrical contractor
Wired to code. Torqued to spec. Signed off.
Northline handles service panels, branch circuits, lighting and EV chargers across Brookfield. We run the load calculation before we quote, pull the permit when the job needs one, and test every device under load before the truck leaves.
Mon–Sat 7a–6p · Brookfield & West Brookfield and the surrounding towns
Our work
From one dead outlet to a full 200-amp service upgrade.
Pick whichever sounds like what's happening at your place — we'll take it from there.
Service Panel & Breaker Upgrades
Breakers that won't hold, a fuse box from the sixties, or not enough capacity for the addition. We size the service properly and swap it out.
- 100 to 200 amp service upgrades
- Fuse box replacement
- Breaker repair & replacement
- Whole-home surge protection
Wiring & Rewiring
New circuits for a remodel, or cloth-and-knob wiring in an older Brookfield home that has quietly run out of road.
- Whole-home rewiring
- New branch circuits
- Knob-and-tube replacement
- Code correction after a failed inspection
Lighting Installation
Fixtures hung level, boxes rated for the weight, and switch legs that do what the plate says they do.
- Recessed & can lighting
- Ceiling fans and rated boxes
- Under-cabinet lighting
- Outdoor, soffit & landscape lighting
Outlets, Switches & GFCI
Dead receptacles, a switch plate that's warm to the touch, or a kitchen still running without GFCI protection.
- New receptacles and dedicated circuits
- GFCI & AFCI protection
- Dimmers and smart switches
- USB and 20-amp counter outlets
EV Charger Installation
A Level 2 charger is a 240-volt appliance, not an accessory. We check the panel can carry it before anything gets mounted.
- Level 2 charger installation
- Dedicated 240V circuits
- Panel load calculation
- Permit & inspection coordination
Fault Finding & Repair
Something is tripping, buzzing, flickering or getting warm and nobody can tell you why. We trace it to the actual fault.
- Dead circuit tracing
- Nuisance breaker tripping
- Buzzing, arcing and burning smells
- Pre-purchase safety inspections
How it works
From the first call to the final test
Tell us what it's doing
Dead outlet, a breaker that won't reset, lights that dim when the AC kicks on. Describe the symptom and we'll give you the soonest honest window — often the same day.
A written price before anything opens
We diagnose it, then hand you a flat rate in writing. No hourly meter running while we trace a circuit back to its junction box.
Tested, labelled, inspected
Work done to code, terminations torqued to spec, the panel directory actually filled in, and the inspection coordinated where the job calls for one.
Pricing
Flat rates, quoted before the panel opens
Electrical work should never end in a mystery invoice. We price most jobs flat-rate so the number is settled before a cover comes off. Here are the common ones to give you a ballpark — your exact quote is always free.
Service call & diagnostic
$89
Tracing a dead outlet, a flicker, or a breaker that keeps tripping. Applied toward the repair.
Standard install
Starting at $249
Ceiling fans, added receptacles, switches, GFCI upgrades and single fixtures done in one visit.
Panel upgrade
Starting at $1,850
Full 200-amp service or fuse box replacement, including permit and inspection coordination.
Rewires & whole-home projects
$3,000 – $12,000+
Every house is wired a little differently. We walk the job with you and put a detailed written estimate together, free of charge.
- Free written estimate on every project
- Flat rate agreed before a cover comes off
- No overtime or weekend upcharge on scheduled work
Why us
What a licensed crew does differently
A licensed electrician does the work
Not a handyman guessing at neutrals behind your drywall. The person who holds the licence is the person on the ladder.
The number doesn't move
You get a flat rate in writing before we start. If tracing the fault takes three hours instead of one, that's our problem, not your invoice.
We arrive in the window we gave you
A text when we're on the way, and a truck stocked well enough that one service call doesn't quietly become three visits.
The panel leaves labelled
Every breaker mapped and marked, connections torqued, and the workmanship guaranteed. If something isn't right afterwards, we come back and sort it.
Recent jobs
Recent panels, circuits and fixtures around Brookfield
The everyday service calls and the bigger upgrades we run for neighbours across the township.
Panel upgrades
Photo coming soon
Recessed lighting
Photo coming soon
EV charger installs
Photo coming soon
Outlet & switch work
Photo coming soon
Sample layout · photos of your own finished panels and installs will fill this gallery.
Reviews
Where your Google reviews will sit
“This is where a real Google review will go once you collect a few. Your best customers' words, front and centre.”
“A second review sits here. Short, specific, and in the customer's own voice — that's what earns the next call.”
“And a third. Once you have five real ones, we wire up a live star rating right here.”
Collect a few Google or Facebook reviews and they replace these cards — with a live star rating.
Service area
Where our trucks run
Based in Brookfield and covering the township day to day. We reach the outlying towns on request — just say where you are when you call.
Questions
The questions we get on the phone
Are you licensed and insured?
Yes. The work is performed by a licensed electrician and backed by liability insurance and workers' compensation. We're happy to send the licence and certificate of insurance before you book anything.
Do you charge for estimates?
Written estimates for projects — panel upgrades, rewires, EV chargers, fixture installs — are free. Diagnostic troubleshooting carries a flat service-call fee, which we apply toward the repair if you go ahead.
Can you come out the same day?
Often, yes. We hold slots for same-day fault finding. Call (555) 123-4567 and we'll tell you the soonest window we can honestly commit to rather than the one you want to hear.
My breaker keeps tripping. Is that dangerous?
A breaker that trips repeatedly is doing its job — it's telling you about an overload, a short, or a ground fault. Resetting it over and over is the part that's risky, because the underlying cause doesn't go away. We trace it to the fault instead of just flipping it back.
Do you pull permits and handle inspections?
Yes. Panel upgrades, EV chargers, service changes and most new circuits need one. We pull the permit and coordinate the inspection so the work is documented and signed off properly.
Will my panel come back labelled?
Always. We map the circuits and fill in the directory before we close it up, so the next person who opens that panel — including us — isn't guessing.
Ready to stop resetting that breaker?
One dead circuit or a full 200-amp service upgrade — tell us what it's doing and we'll come back with a written flat rate. Free, and no obligation attached.
Mon–Sat 7a–6p · Based in Brookfield and covering the township day to day. We reach the outlying towns on request — just say where you are when you call.